Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

Troubleshoot Device Bringup

To verify the status of the bringup of a vEdge router:

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the device using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the device by clicking its hostname. The screen changes and the left pane lists the categories of information you can display about the device.
  4. Click Troubleshooting in the left pane.
  5. From the Connectivity pane, click Device Bringup.

The Device Bringup screen opens and displays:

  • Troubleshooting drop-down—Located to the right of the Select Device drop-down. Click an option to view troubleshooting information. To close the drop-down, click the Troubleshooting button again.
  • Device bringup state—Indicated by one of the following states:
    • Green check mark—Indicates that the device has successfully established control-plane connections with the controller devices in the network and is up and running.
    • Gray check mark—Indicates that ZTP was disabled in the Administration ► Settings screen when the device initially came up. You see this state for the Software Image Update box only.
    • Red check mark—Indicates that the device failed to establish control-plane connections with the controller devices in the network and is not up and running.
    • Yellow exclamation point—Indicates that vManage NMS could not determine the reason for the device bringup failure.

Revision History

Introduced in vManage NMS in Release 17.2.

Additional Information

Viptela Overlay Network Bringup

  • Was this article helpful?