Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

View PIM Information

vEdge routers that participate in a multicast overlay network must be running PIM.

To view PIM information on a vEdge router:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the vEdge router using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the vEdge router by clicking its system IP address.
  4. In the screen that opens, select Real Time in the left pane.
  5. Perform one of the procedures below to view specific PIM information.

In Releases 16.1 and earlier

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the device belongs.
  3. Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
  4. Select the device from the left pane.
  5. In the right pane, click the Real Time toggle button.
  6. Perform one of the procedures below to view specific PIM information.

View Interfaces Running PIM

From the command drop-down located in the right pane, select PIM Interfaces.

CLI equivalent: show pim interface

View PIM Neighbors

From the command drop-down located in the right pane, select PIM Neighbors.

CLI equivalent: show pim neighbor

View PIM-Related Statistics

From the command drop-down located in the right pane, select PIM Statistics.

CLI equivalent: show pim statistics

Additional Information

See the Configuring Multicast Overlay Routing article for your software release.

  • Was this article helpful?