Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

View Multicast Information

vEdge routers can participate in a multicast overlay network.

To view multicast information on a vEdge router:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the vEdge router using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the vEdge router by clicking its system IP address.
  4. In the screen that opens, select Real Time in the left pane.
  5. Perform one of the procedures below to view specific multicast information.

In Releases 16.1 and earlier

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the device belongs.
  3. Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
  4. Select the device from the left pane.
  5. In the right pane, click the Real Time toggle button.
  6. Perform one of the procedures below to view specific multicast information.

View Topology Information about the Multicast Domain

From the command drop-down located in the right pane, select Multicast Topolocy.

CLI equivalent: show multicast topology

View Peers That Support Multicast

From the command drop-down located in the right pane, select OMP Multicast Advertised Autodiscover or OMP Multicast Received Autodiscover.

CLI equivalent: show omp multicast multicast-auto-discover

View Information about IPsec Tunnels between Multicast Peers

From the command drop-down located in the right pane, select Multicast Tunnels.

CLI equivalent: show multicast tunnel

View Multicast Reverse-Path Forwarding Information

From the command drop-down located in the right pane, select Multicast RPF.

CLI equivalent: show multicast rpf

View Multicast Replicators

From the command drop-down located in the right pane, select Multicast Replicators

CLI equivalent: show multicast replicator

View Multicast Routes That OMP Has Learned from PIM Join Messages

From the command drop-down located in the right pane, select OMP Multicast Advertised Routes or OMP Multicast Received Routes.

CLI equivalent: show omp multicast-routes

Additional Information

See the Configuring Multicast Overlay Routing article for your software release.

  • Was this article helpful?