Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

View BGP Information

You can configure the Border Gateway Protocol (BGP) on vEdge routers to enable routing on the service side (site-local side) of the router, thus providing reachability to networks at the routers' local sites.

To view BGP information on a vEdge router:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the vEdge router using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the vEdge router by clicking its system IP address.
  4. In the screen that opens, select Real Time in the left pane.
  5. Perform one of the procedures below to view specific BGP information.

In Releases 16.1 and earlier

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the device belongs.
  3. Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
  4. Select the device from the left pane.
  5. In the right pane, click the Real Time toggle button.
  6. Perform one of the procedures below to view specific BGP information.

View BGP Connection Status

From the command drop-down located in the right pane, select BGP Summary.

CLI equivalent: show bgp summary

View BGP Neighbors

From the command drop-down located in the right pane, select BGP Neighbors.

CLI equivalent: show bgp neighbor

View Routes Learned by BGP

From the command drop-down located in the right pane, select BGP Routes.

CLI equivalent: show bgp routes

Release Information

Introduced in vManage NMS in Release 15.2.

Additional Information

See the Configuring Unicast Overlay Routing article for your software release.

  • Was this article helpful?