Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

vEdge 5000 Router Default Configuration

Each vEdge router is shipped from the factory with a default configuration. The default configuration file sets the default CLI prompt to vEdge#, configures OMP, and enables logging of syslog messages to a file.

If you install the 8x1-Gigabit Ethernet SFP NIM in NIM Slot 0, the default configuration file on the vEdge 5000 router looks like this:

vEdge5000# show running-config 
system
 vbond ztp.viptela.com
 aaa
  auth-order local radius tacacs
  usergroup basic
   task system read write
   task interface read write
  !
  usergroup netadmin
  !
  usergroup operator
   task system read
   task interface read
   task policy read
   task routing read
   task security read
  !
  user admin
   password $6$t.vzhbSwOUaaCnRu$<wbr/>AiJYG3VFR1NurXPY7YXSputMMv4hg3<wbr/>Bign362rj4IIWXm7uVfiReqv/<wbr/>4EhKG2QUJSaZnZZPveQYBfIozCioyE<wbr/>/
  !
 !
 logging
  disk
   enable
  !
 !
!
omp
 no shutdown
 graceful-restart
 advertise connected
 advertise static
!
security
 ipsec
  authentication-type ah-sha1-hmac sha1-hmac
 !
!
vpn 0
interface ge0/0
  ip dhcp-client
  tunnel-interface
   encapsulation ipsec
   no allow-service bgp
   allow-service dhcp
   allow-service dns
   allow-service icmp
   no allow-service sshd
   no allow-service netconf
   no allow-service ntp
   no allow-service ospf
   no allow-service stun
  !
  no shutdown
 !
!
vpn 512
interface mgmt0
  ip address 192.168.1.1/24
  no shutdown
!

Additional Information

Viptela Overlay Network Bringup

  • Was this article helpful?