Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

Security CLI Reference

CLI commands for configuring and monitoring security.

Security Configuration Commands

Use the following commands to configure security parameters:

security
  control
    protocol (dtls | tls)
    tls-port number 
  ipsec
    authentication-type type
    rekey seconds   
    replay-window number
vpn vpn-id
  interface ipsecnumber
    access-list acl-name
    block-non-source-ip
    clear-dont-fragment
    dead-peer-detection interval seconds retries number
    description text
    ike
      authentication-type type
        local-id id
        pre-shared-secret password 
        remote-id id
      cipher-suite suite
      group number
      mode mode
      rekey seconds
      version number
    ip address ipv4-prefix/length
    ipsec 
      cipher-suite suite
      perfect-forward-secrecy pfs-setting 
      rekey seconds
      replay-window number
    mtu bytes
    policer policer-name
    rewrite-rule rule-name
    [no] shutdown
    tcp-mss-adjust bytes
    tunnel-destination (dns-name | ipv4-address)
    (tunnel-source ip-address | tunnel-source-interface interface-name)

Security Monitoring Commands

show control connections
show security-info

  • Was this article helpful?