Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

System, Interface, and SNMP CLI Reference

CLI commands for configuring and monitoring system-wide parameters, interfaces, and SNMP on vEdge routers and vSmart controllers.

Interface Configuration Commands

Use the following commands to configure interfaces and interface properties in the Viptela overlay network. You configure interfaces on a per-VPN basis.

vpn vpn-id
  interface interface-name    
    access-list acl-list (on vEdge routers only)
    arp 
      ip ip-address mac mac-address    
    arp-timeout seconds (on vEdge routers only)
    clear-dont-fragment  
    description text    
    dhcp-helper ip-address (on vEdge routers only)
    dhcp-server (on vEdge routers only)
      address-pool prefix/length
      exclude ip-address
      lease-time seconds
      max-leases number
      offer-time minutes
      options
        default-gateway ip-address
        dns-servers ip-address
        domain-name domain-name
        interface-mtu mtu
        tftp-servers ip-address
      static-lease mac-addressduplex (full | half) 
    flow-control (bidirectional | egress | ingress) 
    (ip address ipv4-prefix/length | ip dhcp-client [dhcp-distance number])
    (ipv6 address ipv6-refix/length | ipv6 dhcp-client [dhcp-distance number] [dhcp-rapid-commit])
    mac-address mac-address    
    mtu bytes 
    nat (on vEdge routers only)
      block-icmp-error     
      direction (inside | outside)
      [no] overload 
      port-forward port-start port-number1 port-end port-number2
        proto (tcp | udp) private-ip-address ip address private-vpn vpn-id
      refresh (bi-directional | outbound)
      respond-to-ping
      static source-ip ip-address1 translate-ip ip-address2 (inside | outside)
      tcp-timeout minutes
      udp-timeout minutes
    pmtu 
    policer policer-name (on vEdge routers only)
    ppp (on vEdge routers only)
      ac-name name
      authentication (chap | pap) hostname name password password 
    pppoe-client (on vEdge routers only)
        ppp-interface name   
    qos-map name (on vEdge routers only)
    rewrite-rule name (on vEdge routers only)
    shaping-rate name (on vEdge routers only)
    shutdown
    speed speed 
    tcp-mss-adjust bytes 
    technology technology (on vEdge routers only; in Releases 16.3.2 and later)
    tunnel-interface 
      allow-service service-name (on vEdge routers only)
      bind geslot/port (on vEdge routers only)
      carrier carrier-name 
      color color [restrict]
      connections-limit number (on vManage NMSs only)
      encapsulation (gre | ipsec) (on vEdge routers only)
        preference number     
        weight number
      hello-interval milliseconds
      hello-tolerance seconds
      hold-time milliseconds (on vEdge routers only)
      last-resort-circuit (on vEdge routers only)
      max-control-connections number
      nat-refresh-interval seconds
      vmanage-connection-preference number (on vEdge routers only)
    upgrade-confirm minutes
    vrrp group-name (on vEdge routers only)
       priority number
       timer seconds
       track-omp

SNMP Configuration Commands

Use the following commands to configure SNMP:

snmp
  community name    
    authorization (read-only | read-write)
    view string  
  contact string
  group group-name authentication
    view string
  location string  
  name string
  [no] shutdown
  trap
    group group-name
      trap-type
        level severity
    target vpn-id ip-address udp-port
      community-name community-name
      group-name group-name
      source-interface interface-name
  user username
    auth authentication
    auth-password password
    group group-name
    priv privacy
    priv-password password
  view string    
    oid oid-subtree [exclude]

SNMP Monitoring Commands

Use the following command to monitor SNMP:

show running-config snmp—Display the active configuration that is running on the Viptela device.

System Configuration Commands

Use the following commands to configure system-wide parameters:

banner
  login "text"
  motd "text"
system
  aaa
    admin-auth-order (local | radius | tacacs)
    auth-fallback  
    auth-order (local | radius | tacacs)
    radius-servers tag
    user user-name
      group group-name
      password password
    usergroup group-name
      task (interface | policy | routing | security | system) (read | write)
  archive 
    interval minutes 
    path file-path/filename 
    ssh-id-file file-path/filename 
    vpn vpn-id
  clock
    timezone timezone
  console-baud-rate rate 
  control-session-pps rate 
  description text 
  device-groups group-name
  domain-id domain-id
  gps-location (latitude decimal-degrees | longitude decimal-degrees)
  host-name string
  host-policer-pps rate
  icmp-error-pps rate
  iptables-enable
  location string
  logging
    disk
      enable
      file
        name filename        
        rotate number        
        size megabytes      
      priority priority
    host
      name (name | ip-address)
      port udp-port-number      
      priority priority      
      rate-limit number interval seconds
  multicast-buffer-percent percentage
  ntp 
    keys
      authentication key-id md5 md5-key
      trusted key-id
    server (dns-server-address | ipv4-address)
      key key-id
      prefer
      source-interface interface-name
      version number
  ​    vpn vpn-id
  organization-name string  
  port-hop
  port-offset number
  radius    
    retransmit number    
    server ip-address      
      auth-port port-number      
      priority number
      secret-key key 
      source-interface interface-name      
      tag tag​
      vpn vpn-id    
    timeout seconds  
  site-id site-id  
  system-ip ip-address
  system-tunnel-mtu bytes
  tacacs 
    authentication authentication-type
    server ip-address      
      auth-port port-number      
      priority number
      secret-key key 
      source-interface interface-name    
      ​vpn vpn-id    
    timeout seconds  
  timer
    dns-cache-timeout minutes
  track-default-gateway
  track-transport 
  upgrade-confirm minutes
  [no] usb-controller
  vbond (dns-name | ip-address) [local] [port number] [ztp-server]

Additional Information

System and SNMP Overview

  • Was this article helpful?