Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

show ip nat interface-statistics

show ip nat interface-statistics—List packet, NAT, and ICMP statistics for the interfaces on which NAT is enabled (on vEdge routers only).

Command Syntax

show ip nat filter interface-statistics [nat-vpn vpn-id]

Options

None
Display statistics for all interfaces in all VPNs.
VPN
nat-vpn vpn-id
Display statistics for the interfaces in the specified VPN.

Output Fields

The output fields are self-explanatory.

Example Output

vEdge# show ip nat interface-statistics
                                                NAT   NAT     NAT     NAT                                INBOUND                                    NAT    NAT     NAT 
             NAT       NAT      NAT     NAT     MAP   FILTER  FILTER  STATE  NAT      OUTBOUND  INBOUND  ICMP                NAT        NAT         MAP    MAP     FILTER    NAT MAP 
             OUTBOUND  INBOUND  ENCODE  DECODE  ADD   ADD     LOOKUP  CHECK  POLICER  ICMP      ICMP     ERROR    NAT        FRAGMENTS  UNSUPPORTED NO     CANNOT  MAP       IP POOL 
VPN  IFNAME  PACKETS   PACKETS  FAIL    FAIL    FAIL  FAIL    FAIL    FAIL   DROPS    ERROR     ERROR    DROPS    FRAGMENTS  FAIL       PROTO       PORTS  XLATE   MISMATCH  EXHAUSTED 
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1    ge0/4   0         0        0       0       0     0       0       0      0        0         0        0        0          0          0           0      0       0         0 
1    ge0/5   0         0        0       0       0     0       0       0      0        0         0        0        0          0          0           0      0       0         0

vEdge# show ip nat interface-statistics | notab 
ip nat interface-statistics nat-vpn 1 nat-ifname natpool1
 nat-outbound-packets      0
 nat-inbound-packets       0
 nat-encode-fail           0
 nat-decode-fail           0
 nat-map-add-fail          0
 nat-filter-add-fail       0
 nat-filter-lookup-fail    0
 nat-state-check-fail      0
 nat-policer-drops         0
 outbound-icmp-error       0
 inbound-icmp-error        0
 inbound-icmp-error-drops  0
 nat-fragments             0
 nat-fragments-fail        0
 nat-unsupported-proto     0
 nat-map-no-ports          0
 nat-map-cannot-xlate      0
 nat-filter-map-mismatch   0
 nat-map-ip-pool-exhausted 0
...

Release Information

Command introduced in Viptela Software Release 14.2.

  • Was this article helpful?