Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

show container instances

show container instances—List information about the vSmart controller containers running on the container host (on vContainer hosts only).

Command Syntax

show container instances [instance-parameter]

Options

None
List information about all the vSmart controller containers running on the container host
Specific Instance Parameter
instance-parameter
List information about a specific parameter for a container instance. instance-parameter can be one of the following, which correspond to the column headers in the command output:
• admin-state (down | up)
• image image-name
• interface (host-ip-address ip-address | ip-address ip-address)
• oper-state  (down | up)
• personality device-type

Output Fields

The output fields are self-explanatory.

Example Output

vContainer# show container instances 

               ADMIN  OPER                                IF                 HOST IP     
NAME           STATE  STATE  IMAGE           PERSONALITY  NAME  IP ADDRESS   ADDRESS     
-----------------------------------------------------------------------------------------
first_vsmart   up     up     99.99.999-2440  vsmart       eth0  169.254.0.2  10.0.1.25   
second_vsmart  up     up     99.99.999-2440  vsmart       eth0  169.254.0.3  10.0.1.26   
vm10           up     up     99.99.999-2444  vsmart       eth0  169.254.0.1  10.0.1.30   
                                                          eth1  169.254.1.1  10.0.12.20  
                                                          eth2  169.254.2.1  10.2.2.20

Release Information

Command introduced in Viptela Software Release 16.2.

Additional Information

container
request container image install
request container image remove
show container instances

  • Was this article helpful?