Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

tunnel-source-interface

vpn interface gre tunnel-source-interface—Configure the physical interface that is the source of a GRE tunnel (on vEdge routers only). To configure the source IP address of a GRE tunnel, use the tunnel-source command.

Command Hierarchy

vpn vpn-id  
  interface grenumber    
    (tunnel-source ip-address | tunnel-source-interface interface-name)

Options

Source Interface
interface-name
Name of the physical interface that is the source of a GRE tunnel. This interface must be configured in the same VPN as the GRE tunnel.

Example

Configure the source interface for a GRE tunnel:

vEdge(config-vpn-0)# interface gre1
vEdge(config-interface-gre1)# tunnel-source-interface ge1/2
vEdge(config-interface-gre1)# show full configuration
vpn 0
 interface gre1
  ip address 10.0.111.11/24
  keepalive 60 10
  tunnel-source-interface  ge1/2
  tunnel-destination 172.168.1.1
  no shutdown
 !
!

Release Information

Command introduced in Viptela Software Release 16.1.

Additional Information

See the Configuring Interfaces article for your software release.
keepalive
tunnel-destination
tunnel-source

  • Was this article helpful?