Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

ip address

vpn interface ip address—Configure an interface's IPv4 address as a static address (on vEdge routers and vSmart controllers only). To configure the interface to receive its IP address from a DHCP server, use the ip dhcp-client command.

vManage Feature Template

For vEdge routers and vSmart controllers only:

Configuration ► Templates ► VPN Interface Bridge
Configuration ► Templates ► VPN Interface Cellular (for vEdge cellular wireless routers only)
Configuration ► Templates ► VPN Interface Ethernet
Configuration ► Templates ► VPN Interface GRE
Configuration ► Templates ► VPN Interface IPsec
Configuration ► Templates ► VPN Interface NAT Pool
Configuration ► Templates ► VPN Interface PPP
Configuration ► Templates ► VPN Interface PPP Ethernet

Command Hierarchy

vpn vpn-id  
  interface interface-name    
    (ip address ipv4-prefix/length | ip dhcp-client [dhcp-distance number])

Options

IP Address
ipv4-prefix/length
IPv4 address of the interface. Specify the prefix in decimal four-part dotted notation. For loopback and NAT pool interfaces, the length must be /32. The address cannot be the same as the system IP address that is configured in VPN 0.

Operational Commands

show interface
show ipv6 interface

Example

Configure an interface's IP address:

vEdge# show running-config vpn 1 interface ge0/4
vpn 1
 interface ge0/4
  description "VPN 1 interface"
  ip address 10.20.25.16/24
  no shutdown
 !
!

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the Segmentation CLI Reference article for your software release.
ip dhcp-client
ipv6 address
ipv6 dhcp-client
secondary-address
system-ip

  • Was this article helpful?