Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

autonegotiate

vpn interface autonegotiate—Configure whether an interface runs in autonegotiation mode (on vEdge routers only).

On all vEdge router models, all interfaces support 1-Gigabit Ethernet SFPs. These SFPs can either be copper or fiber. For fiber SFPs, the supported speeds are 1 Gbps full duplex and 100 Mbps full duplex. For copper SFPs, the supported speeds are 10/100/1000 Mbps and half/full duplex. To use a fixed speed and duplex configuration for interfaces that do not support autonegotiation, you must disable autonegotiation and then use the speed and duplex commands to set the appropriate interface link characteristics.

Integrated routing and bridging (IRB) interfaces do not support autonegotiation. In Releases 17.1 and later, the autonegotiate command is not available for these interfaces.

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► VPN Interface Bridge
Configuration ► Templates ► VPN Interface Cellular (for vEdge cellular wireless routers only)
Configuration ► Templates ► VPN Interface Ethernet
Configuration ► Templates ► VPN Interface PPP Ethernet

vManage Feature Template

For all Viptela devices:

Configuration ► Templates ► VPN Interface Bridge

Command Hierarchy

vpn vpn-id  
  interface geport/slot   
    [no] autonegotiate

Options

None

Operational Commands

show interface

Example

Set the interface speed to 10 Mbps:

vpn 0
 interface ge0/0
   no autonegotiate
   speed 10

Release Information

Command introduced in Viptela Software Release 15.3.​
In Release 17.1, disable this command for IRB interfaces.

Additional Information

See the Segmentation CLI Reference article for your software release.
duplex
speed

  • Was this article helpful?