Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

show tunnel inbound-connections

show tunnel inbound-connections—Display information about the IPsec tunnel connections that originate on the local router, showing the TLOC addresses for both ends of the tunnel (on vEdge routers only).

In Releases 15.2 and later, this command has been renamed to show ipsec outbound-connections.

Command Syntax

show tunnel inbound-connections
show tunnel inbound-connections local-tloc-address [local-color [remote-tloc-address [remote-color [(dest-ip | dest-port | source-ip | source-port) ] ] ] ]

Options

None
Display information for all the IPsec connections that originate on the vEdge router. The tunnel connections are listed in order according to the local TLOC address.
Specific Tunnel Connection
local-tloc-address[local-color [remote-tloc-address [remote-color [(dest-ip | dest-port | source-ip | source-port) ] ] ] ]
Display information for a specific IPsec connection.

Output Fields

The output fields are self-explanatory.

Example Output

vEdge# show tunnel inbound-connections 
SOURCE           SOURCE  DEST             DEST    REMOTE           REMOTE           LOCAL            LOCAL            
IP               PORT    IP               PORT    TLOC ADDRESS     TLOC COLOR       TLOC ADDRESS     TLOC COLOR       
----------------------------------------------------------------------------------------------------------------------
10.1.14.14       12350   10.0.5.11        12346   172.16.255.14    lte              172.16.255.11    lte              
10.1.15.15       12346   10.0.5.11        12346   172.16.255.15    lte              172.16.255.11    lte              
10.1.16.16       12346   10.0.5.11        12346   172.16.255.16    lte              172.16.255.11    lte              
10.0.5.21        12346   10.0.5.11        12346   172.16.255.21    lte              172.16.255.11    lte

Release Information

Command introduced in Viptela Software Release 14.1.
In Release 15.2, command renamed to show ipsec inbound-connections.

  • Was this article helpful?