Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

show policer

show policer—Display information about the policers that are in effect (on vEdge routers only).

Command Syntax

show policer [burst bytes] [oos-action action] [oos-pkts number] [ratebps]

Options

None
Display information about all policers.
Specific Burst Size
burst bytes
Display information about policers that match the specified burst size.
Range: 0 through 264 – 1 bytes
Specific Out-of-Specification Action
oos-action action
Display information about policers that match the specified OOS action. A policed packet is out of specification when the policer does not allow it to pass. Depending on the policer configuration, these packets are either dropped or they are remarked, which sets the packet loss priority (PLP) value on the egress interface to high.
Action: drop, remark
Specific Out-of-Specification Packet Count
oos-pkts number
Display information about policers that match the specified OOS packet count.
Range: 0 through 264 – 1
Specific Bandwidth
rate bps
Display information about policers that match the specified bandwidth.
Range: 0 through 264 – 1 bps

Output Fields

The output fields are self-explanatory.

Example Output

Display the policers that are in effect on the router:

vEdge# show policer  
                                                  OOS     OOS   
NAME       INDEX  DIRECTION  RATE          BURST  ACTION  PKTS  
----------------------------------------------------------------
ge0_0_llq  10     out        200000000000  15000  drop    0     
ge0_3_llq  11     out        200000000000  15000  drop    0

Release Information

Command introduced in Viptela Software Release 14.1.
In Release 16.3, add burst, oos-action, oos-pkts, and rate options.

  • Was this article helpful?