Skip to main content
Viptela is now part of Cisco.
Support
Product Documentation
Viptela Documentation

speed

vpn interface speed—Set the speed of the interface. Configure the interface speed, for use when the remote end of the connection does not support autonegotiation.

On all vEdge router models, all interfaces support 1-Gigabit Ethernet SFPs. These SFPs can either be copper or fiber. For fiber SFPs, the supported speeds are 1 Gbps full duplex and 100 Mbps full duplex. For copper SFPs, the supported speeds are 10/100/1000 Mbps and half/full duplex. By default, the router autonegotiates the speed and duplex values for the interfaces.

To use a fixed speed and duplex configuration for interfaces that do not support autonegotiation, you must disable autonegotiation and then use the speed and duplex commands to set the appropriate interface link characteristics.

vManage Feature Template

For all Viptela devices:

Configuration ► Templates ► VPN Interface Ethernet
Configuration ► Templates ► VPN Interface PPP Ethernet

Command Hierarchy

vpn vpn-id 
  interface interface-name    
    speed speed

Options

Interface Speed
speed
Interface speed, in Mbps
Values: 10, 100
Default: Autonegotiate (10/100/1000 Mbps) on vEdge 1000 routers

Operational Commands

show interface

Example

Set the interface speed to 100 Mbps:

vEdge# config
Entering configuration mode terminal
vEdge(config)# vpn 0 interface ge0/0
vEdge(config-interface-ge0/0)# no autonegotiate
vEdge(config-interface-ge0/0)# speed 100

Release Information

Command introduced in Viptela Software Release 14.1.​
Support for autonegotiation added in Release 15.3.

Additional Information

See the Segmentation CLI Reference article for your software release.
autonegotiate
duplex

  • Was this article helpful?