cellular

Last updated
Save as PDF

cellular—Configure a cellular module on a vEdge router (on vEdge routers only).

The firmware installed in the router's cellular modules is specific to each service provider and determines which profile properties you can configure. You can modify the attributes for a profile only if allowed by the service provider.

To associate a cellular profile with a cellular interface, use the interface cellular profile configuration command.

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► Cellular Profile

Command Hierarchy

cellular cellularnumber
  profile number
   apn name
   auth auth-method
   ip-addr ip-address
   name profile-name
   pdn-type type
   primary-dns ip-address
   secondary-dns ip-address
   user-name user-name
   user-pass password

Options

Cellular Interface Name: cellularnumber
Name of the cellular interface. It must be cellular0.

Operational Commands

clear cellular errors
clear cellular session statistics
show cellular modem
show cellular network
show cellular profiles
show cellular radio
show cellular sessions
show cellular status
show interface

Example

Configure a cellular interface with a profile, and the profile with an APN.

vEdge# show running-config cellular 
cellular cellular0
 profile 1
  apn reg_ims
 !

Release Information

Command introduced in Viptela Software Release 16.1.

Additional Information

See the Configuring Network Interfaces and Configuring Cellular Interfaces articles for your software release.
interface cellular profile