policy ipv6 access-list sequence action—Configure the actions to take when the match portion of an IPv6 policy is met (on vEdge routers only).
For Localized Data Policy
- Accept or Drop
- (accept | drop)
By default, all packets that match the parameters in the match portion of the policy access-list configuration are dropped. Include drop to explicitly reject matching packets. Include accept to accept matching packets and to perform any specified actions.
- Count Packets
- count counter-name
Count the packets that match the match criteria, saving the information to the specified filename. If you configure a counter and additional actions, such as policing, the data packets are counted before the other actions are performed, regardless of the order in which you enter the commands in the configuration.
- class class-name
Assign the packets to the specified QoS class name.
- Log Packet Headers
Log the packet headers into system logging (syslog) files.
- mirror mirror-name
Mirror the packets to the specified mirror.
- policer policer-name
Police the packets using the specified policer.
- Traffic Class
- set traffic-class value
For QoS, set or overwrite the traffic class value in the packet. value can be a number from 0 through 63.
Configure an IPv6 ACL that changes the traffic class on TCP port 80 data traffic, and apply the ACL to an interface in VPN 0:
vEdge# show running-config policy ipv6 access-list policy ipv6 access-list traffic-class-48-to-46 sequence 10 match destination-port 80 traffic-class 48 ! action accept count port_80 log set traffic-class 46 ! ! ! default-action accept ! ! vEdge# show running-config vpn 0 interface ge0/7 ipv6 vpn 0 interface ge0/7 ipv6 access-list traffic-class-48-to-46 in ! !
Command introduced in Viptela Software Release 14.1.
In Release 16.3, add support for IPv6.